To Next Page
I
Isaiah WagnerAug 5, 2025
What to do if Motomaster 009-1534-6 will not lift?
- LLisa LindseyAug 5, 2025
If the jack will not lift, check that the Release Pedal is not stuck and raises completely.
What to do if Motomaster 009-1534-6 will not lift?
If the jack will not lift, check that the Release Pedal is not stuck and raises completely.
What to do if Ram on Motomaster 009-1534-6 Jacks may be low on fluid?
If the ram may be low on fluid, check the fluid level and refill if needed.
What to do if my Motomaster 009-1534-6 pump stroke feels spongy?
If the pump stroke feels spongy, it may be because the valves are blocked and not closing fully. To fix this, and with assistance: 1. Lower the Lift Arm and release the Release Pedal. 2. Manually lift the Lift Arm several inches. 3. Press the Release Pedal and force the Lift Arm down quickly. This will flush the valves.
Critical warnings and advice for safe operation and assembly.
Guidelines for safe assembly of the jack.
Rules and recommendations for safe operation of the jack.
Procedure to remove air from the hydraulic system for optimal performance.
Instructions on how to safely position and lift a vehicle with the jack.
Steps for safely descending a lifted vehicle using the jack.
Routine procedures for cleaning, maintaining, and lubricating the jack.
General| Brand | Motomaster |
|---|---|
| Model | 009-1534-6 |
| Category | Jacks |
| Language | English |
