Motomaster 011-2064-0

Questions and Answers

F
Francisco GomezAug 4, 2025
What to do if Motomaster Remote Starter doesn't start the engine?
- S
  Samantha SmithAug 4, 2025
  If the engine won't start when using the Motomaster Remote Starter, first, ensure the main power is ON. If the vehicle battery is too low, you might need to use the override feature. Make sure the unit has at least 75% charge, and if not, recharge it. Check and reconnect the clamps to ensure proper contact and correct polarity. If the problem persists, the vehicle battery might be damaged and need replacement, or there could be a mechanical issue requiring servicing. In rare cases, the battery in the unit itself could be damaged, requiring unit replacement.
C
Cynthia BurgessAug 10, 2025
How to fix Motomaster Remote Starter not charging?
- D
  Donna AllenAug 10, 2025
  If the Motomaster Remote Starter unit will not charge, try plugging it into a different USB outlet. If that doesn't work, the USB cable may be faulty and need to be replaced. Also, disconnect any accessories plugged into the unit and turn off all functions during recharge, as power draw can prevent charging. If the status LED seems faulty, disconnect the charger, let the unit rest for 15 minutes, then reconnect to check the battery status.
K
Keith TownsendAug 15, 2025
What to do if Motomaster 011-2064-0 air compressor is not working?
- J
  James GreenAug 15, 2025
  If the air compressor on your Motomaster Remote Starter isn't working, first ensure the main power is turned ON. Check that the unit has at least 75% charge and recharge if needed. Verify that the nozzle connector is securely screwed onto the valve stem, or the nozzle adapter is securely connected to both the nozzle connector and the object you are inflating. If the compressor overheats, turn the air compressor switch to the OFF position and let the unit cool down for 10 minutes. If none of these steps work, the air compressor may be faulty, and the unit might need to be replaced.
J
jacob50Aug 21, 2025
Why Motomaster 011-2064-0 USB port is not working?
- R
  Rebecca HancockAug 22, 2025
  If the USB power port on your Motomaster Remote Starter isn't working, first ensure the main power is turned ON. Check the unit's battery charge level and recharge if necessary. Also, verify that the device you're trying to power is compatible with the USB type or port.
D
David WhiteAug 28, 2025
What to do if 12V DC power function on Motomaster Remote Starter does not work?
- P
  Patricia WilsonAug 28, 2025
  If the 12V DC power function on your Motomaster Remote Starter isn't working, first ensure the main power is turned ON. Check the unit's battery charge level and recharge it if necessary. Make sure that the appliance you are trying to power has a maximum draw of 12A.