To Next Page
S
Scott SkinnerJul 25, 2025
Why does my Motomaster Eliminator 011-2100-4 Inverter shut down?
- HhjonesJul 25, 2025
The Motomaster Inverter might shut down because the battery voltage is below 10.5 V. To prevent this, ensure the input voltage remains above 10.5 V. Alternatively, a weak battery condition or excessive voltage drop could be the cause. In this case, charge or replace the battery, use a lower gauge (heavier) cable, and keep the cable length as short as possible. Also, the inverter might be overheating and in thermal shutdown mode. Allow it to cool, ensure adequate ventilation, and reduce the load to the rated continuous power. If the problem continues, it might be defective, and you should consider contacting customer service.
General
