Motor Saver 250 User Manual

INSTALLATION INSTRUCTIONS FOR SYMCOM’S
MOTORSAVER MODELS 102, 201, 250, 350
BE SURE POWER IS DISCONNECTED PRIOR TO INSTALLATION!!
FOLLOW NATIONAL, STATE AND LOCAL CODES!
INSTRUCTIONS D’INSTALLATION POUR LE SYMCOM
MOTORSAVER, MODÈLES 102, 201, 250, 350
S’ASSURER QUE LE COURANT EST COUPÉ AVANT L’INSTALLATION!
RESPECTER LES LOIS ET CODES LOCAUX, PROVINCIAUX ET FÉDÉRAUX!
INSTRUCCIONES DE INSTALACIÓN PARA LOS MODELOS
MOTORSAVER 102, 201, 250, 350 DE SYMCOM
ANTES DE LA INSTALACIÓN CERCIÓRESE DE QUE ESTÉ DESCONECTADA LA
ENERGÍA ELÉCTRICA ACATE LOS CÓDIGOS NACIONALES, ESTATALES Y LOCALES
2880 North Plaza Drive, Rapid City, SD 57702 • (800) 843-8848
www.symcominc.com
Manufactured by
Visit our website at www.symcominc.com for our
complete catalog and new product listings!
VOLTAGE MONITORS
MONITEUR DE TENSION
EL MONITOR DEL VOLTAJE

Motor Saver 250 Specifications

General

Brand	Motor Saver
Model	250
Category	Other
Language	English

Summary

Installation Instructions

Connections

Settings

Line Voltage Adjustment

Adjust the line voltage to the nominal 3-phase line voltage feeding the motor.

Time Delay Restart

Set restart delay for acceptable power before closing output contacts.

Trip Delay Adjustment

Set trip delay for phasing faults and voltage fluctuations.

Other Optional Adjustments

Adjust any other optional settings available on the unit.

Indicator Light Diagnostics

Details on indicator lights for RUN, RESTART DELAY, REVERSE PHASE, etc.

Troubleshooting

Warranty

Specifications

Notes