Motor Saver 201 User Manual

INSTALLATION INSTRUCTIONS FOR SYMCOM’S
MOTORSAVER MODELS 102, 201, 250, 350
BE SURE POWER IS DISCONNECTED PRIOR TO INSTALLATION!!
FOLLOW NATIONAL, STATE AND LOCAL CODES!
INSTRUCTIONS D’INSTALLATION POUR LE SYMCOM
MOTORSAVER, MODÈLES 102, 201, 250, 350
S’ASSURER QUE LE COURANT EST COUPÉ AVANT L’INSTALLATION!
RESPECTER LES LOIS ET CODES LOCAUX, PROVINCIAUX ET FÉDÉRAUX!
INSTRUCCIONES DE INSTALACIÓN PARA LOS MODELOS
MOTORSAVER 102, 201, 250, 350 DE SYMCOM
ANTES DE LA INSTALACIÓN CERCIÓRESE DE QUE ESTÉ DESCONECTADA LA
ENERGÍA ELÉCTRICA ACATE LOS CÓDIGOS NACIONALES, ESTATALES Y LOCALES
2880 North Plaza Drive, Rapid City, SD 57702 • (800) 843-8848
www.symcominc.com
Manufactured by
Visit our website at www.symcominc.com for our
complete catalog and new product listings!
VOLTAGE MONITORS
MONITEUR DE TENSION
EL MONITOR DEL VOLTAJE

Motor Saver 201 Specifications

General

Brand	Motor Saver
Model	201
Category	Other
Language	English

Summary

INSTALLATION INSTRUCTIONS

CONNECTIONS

SETTINGS

LINE VOLTAGE ADJUSTMENT

Adjust the line voltage setting to match the nominal 3-phase line voltage.

TIME DELAY RESTART

Set the delay between acceptable power and output contact closure for motor restart.

TRIP DELAY ADJUSTMENT

Adjust the delay before tripping on voltage faults; set for voltage fluctuations.

OTHER OPTIONAL ADJUSTMENTS

Adjust optional settings as needed for specific model features.

POWER-UP

INDICATOR LIGHT DIAGNOSTICS

TROUBLESHOOTING

DIMENSIONS FOR MODEL 201

DIMENSIONS FOR MODELS 102, 250, 350

WARRANTY

SPECIFICATIONS

NOTES