Pair the car kit with a compatible phone
1. make sure your car kit is switched off
2. press and hold the "MFB" until the blue and red light flashes
alternately and there is a tone prompt. The car kit is now in
pairing state.
3. Activate the Bluetooth feature on the phone, and set the
phone to search for Bluetooth devices. See the user guide of
your phone for instructions.
4. Select the car kit (MT-2000) from the list of found devices.
5. Enter the pass code “0000” to pair and connect the car kit to
your phone. In some phones you may need to make the
connection separately after pairing. See the user guide of your
phone for details. You only need to pair the car kit with your
phone once.
If the pairing is successful, the car kit’s blue light will flash 3
times briefly. The car kit’s name appears in the phone menu
where you can view the currently paired Bluetooth devices.
To Next Page
Loading...