Basic use
Call handling
To make a call, use your phone in the normal way when the car
kit is connected to your phone. And the blue LED will flash
during the call.
To answer a call, press the “MFB” and the blue LED will flash
during the call.
To reject a call, press the “MFB” for 2 second and there is a tone
prompt when there is incoming call.
To end a call, press the “MFB” one time
In standby state, press the volume + key for 2 seconds to redial
last dialed telephone No. This function requires your phone
supports redialing.
In standby state, press the “MFB” to start voice dialing. This
function requires your mobile support voice dialing. Check the
user manual of your mobile for details.
Adjust the volume
Press volume+ or volume - key to increase or to decrease the
volume during a call.
Mute
During a call, press and hold mute button for about 2 second to
mute the MIC, the same operation to withdraw from the MIC
mute state.
To Next Page
Loading...