EasyManua.ls Logo

MotorGuide Pinpoint User Manual

MotorGuide Pinpoint
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
eng i
FCC and IC Compliance Statement
PINPOINT KEY FOB, FCC ID ‑ MVU10148
ACMA: N2523
IC: 6094A‑09291, 6094A‑09305
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference
that may cause undesired operation.
This device complies with FCC Rules. Changes or modifications not expressly
approved by MotorGuide could void the user's authority to operate the
equipment.
The MotorGuide Pinpoint GPS System complies with Industry Canada RSS‑210
standard. See RSS‑GEN 7.1.5. The term "IC:" before the certification/
registration number only signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical
specifications were met. The term "IC:" before the certification/registration
number does not imply that Industry Canada approved the equipment.
EU Compliance Statement
Attwood Corporation hereby declares that the Motorguide Pinpoint GPS System
is in compliance with the essential requirements and other relevant provisions of
the 99/5/EC R&TTE directive.
A copy of the original CE Declaration of Conformity is on our website at http://
www.motorguide.com/support/certifications.
Environmental Compliance Statement
All MotorGuide products that are subject to the 2002/96/EC WEEE directive are
compliant with the WEEE marking requirement. Such products are marked with
the "crossed‑out wheelie bin" WEEE symbol (shown, below) in accordance with
European Standard EN50419.
54539
© 2013 Mercury Marine
Pinpoint GPS 90-8M0086988 1213

Other manuals for MotorGuide Pinpoint

Question and Answer IconNeed help?

Do you have a question about the MotorGuide Pinpoint and is the answer not in the manual?

MotorGuide Pinpoint Specifications

General IconGeneral
GPSYes
Pinpoint GPS NavigationYes
JogYes
Heading LockYes
Route Record and PlaybackYes
Cruise ControlYes
WaypointsYes
Track LogsYes
CompatibilityMotorGuide trolling motors
Battery LifeNot specified in general specs, depends on the device using Pinpoint GPS

Summary

Regulatory Compliance Information

FCC and IC Standards

Device complies with FCC and Industry Canada regulations.

Warranty Details

MotorGuide Two-Year Limited Warranty

Specifies terms, conditions, and limitations of the two-year limited warranty.

Product Installation and Operation

Installing the GPS Modules

Step-by-step guide for physically installing the GPS modules into the trolling motor.

Trolling Motor Operation

Linking the Handheld Remote

Procedure to pair the handheld remote with the trolling motor.

Trolling Motor Modes

Operating in Manual Mode

How to operate the trolling motor manually using the remote.

Trolling Motor Controls

Anchor Mode Operation

How to activate and use Anchor Mode to maintain a fixed position.

Navigation Modes

Heading Lock Mode Operation

How to make the trolling motor navigate along a fixed heading.

Cruise Control Functionality

Owner Service Assistance