motorini XP50 - Gear Oil Change Procedure; Spark Plug Maintenance

(3) Gear oil
How to change gear oil
Stand on the main stand.
Remove the oil filler plug (1)
Remove the oil drain plug (2) and drain out old
gear oil.
Tighten the oil drain plug (2).
Refill with fresh gear oil and tighten the oil refill
plug (1).
(1)
(2)
Please use the recommended gear oil:
SAE 5W/90
• Total capacity: 110ml approx.
• Replacing capacity: 100ml approx.
(4) Spark plug
Remove the park plug (1) using the spanner provided
in the tool kit.
Clean off any dirt and carbon residue from the spark
plug and check the spark plug gap.
Manually screw the spark plug in its seat and carefully
tighten.
Refit the spark plug cap.
(1) (2)
Adjust the gap (2) to 0.6-0.7mm with a feeler gauge.
Replacement Spark Plug NGK CR7HSA.