APX 8000XE M2 AND M3
117
NEXT > < PREV CONTENTS
Menu Select
Buttons
4-Way
Navigation
Button
Scan
Turning Scan On or Off
ADVANCED FEATURES
This feature allows you to monitor traffic on different channels
by scanning a preprogrammed list of channels.
Procedure:
[Preprogrammed Button]
1. Press the preprogrammed Scan button, or turn the
preprogrammed Scan switch to the Scan on or Scan off
position, to initiate or stop scan.
OR
[Menu]
1. or to Scan.
2. Press the Menu Select button directly below Scan.
The display shows Scan off if scan is disabled.
Press the Menu Select button directly below Scan to
enable scan.
OR
The display shows Scan on and the scan status icon if
scan is enabled.
Press the Menu Select button directly below Scan to
disable scan.
The radio returns to the home screen.
Chan Scan Dir
Zone A
Chan 1
Scan on
To Next Page
Loading...
