APX 8000XE M2 AND M3
119
NEXT > < PREV CONTENTS
Scan
Deleting a Nuisance Channel
ADVANCED FEATURES
If a channel continually generates unwanted calls or noise
(termed a “nuisance” channel), you can temporarily remove
the unwanted channel from the scan list.
This capability does not apply to priority channels or the
designated transmit channel.
Procedure:
[Preprogrammed Button]
1. When the radio is locked onto the channel to be deleted,
press the preprogrammed Nuisance Delete button.
The radio continues scanning the remaining channels in
the list.
OR
[Menu]
1. or to Nuis.
2. Press the Menu Select button directly below Nuis.
The radio continues scanning the remaining channels in
the list.
Push-to-Talk
(PTT) Button
The 16-Position
Select Channel
Knob *
On/Off/Volume
Control Knob