APX 8000XE M2 AND M3
125
NEXT > < PREV CONTENTS
Emergency Operation
ADVANCED FEATURES
The Emergency feature is used to indicate a critical situation.
If the Top (Orange) button is preprogrammed to send an
emergency signal, this signal overrides any other
communication over the selected channel.
Your radio supports the following Emergency modes:
• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm
Check with your dealer or system administrator for more
information on the programming of this feature.
Each channel can only assigned one of the Emergency
modes above. The radio responds differently when pressing
the preprogrammed Emergency button in each channel.
Note: To exit emergency at any time, press and hold the
preprogrammed Emergency button for about a second.
Note: The radio operates in the normal dispatch manner
while in Emergency Call, except if enabled, it returns to one
of the following:
• Tactical/Non-Revert
The radio sends emergency alarm and/or make emergency
call on the current selected channel.
• Non-Tactical/Revert for Conventional system
The radio reverts to the preprogrammed emergency
channel to send alarm and/or make emergency call.
• Non-Tactical/Revert for Trunking system
The radio reverts to the preprogrammed emergency
talkgroup to send alarm and/or make emergency call.
Man Down is an alternate way to activate the Emergency
feature on the condition the Emergency must be set up for
this feature to operate.
To Next Page
Loading...
Need help?
General
