APX 8000XE M2 AND M3
142
NEXT > < PREV CONTENTS
ADVANCED FEATURES
Testing the Man Down Feature
Note: Enable the Emergency feature with Silent Alarm
disabled, but not in Surveillance Mode before running this test
on the radio.
Procedure:
When Man Down is enabled on the radio:
1. Turn the radio on and place in the vertical position, for at
least 5 seconds.
2. Lay the radio down in the horizontal position.
3. Wait for alert tone.
The radio alerts with audible tone and displays Man
Down.
OR
If no tone is heard, make sure that the Man Down feature
is enabled on your radio.
If Man Down feature was not enabled, please enable it
and go through steps 1,2 and 3 again.
OR
If the Man Down feature is enabled and no tone is heard,
send the radio to a qualified technician.
To Next Page
Loading...
