APX 8000XE M2 AND M3
166
NEXT > < PREV CONTENTS
ADVANCED FEATURES
5. Press the Menu Select button below Optn.
6. or to Send Message.
7. Press the Menu Select button below Sel.
8. or to scroll through the address list and highlight
the required address.
OR
or to [Other Recpnt] and press the Menu Select
button below Edit.
A blinking cursor appears on the Enter Address screen.
Use the keypad to type the address entry.
Press to move one space to the left.
Press to move one space to the right.
Press the Menu Select button directly below Del to delete
any unwanted characters.
Press to add a space.
Press to toggle between mixed case mode,
uppercase mode, and lowercase mode.
Press to toggle between numeric and letter mode.
9. Press the Menu Select button directly below Send.
OR
Press PTT button to send the message.
The display shows the Send Message screen and
Sending msg.
If the message is sent, you hear a tone and the display
shows Msg sent.
OR
If the message is not sent, you hear a low tone and the
display shows Send failed.
If the message fails to send, the radio returns you to the main
TMS screen.
Note: The server responds to your query with the required
report in text messages.
You can append a priority status and/or a request reply to
your message.
To Next Page
Loading...
Need help?
General
