APX 8000XE M2 AND M3
165
NEXT > < PREV CONTENTS
ASTRO 25 Advanced Messaging Solution
Sending a Query
ADVANCED FEATURES
This feature is available for radio users who have
successfully logged in with the Two-Factor Authentication.
Query is a special form of Quick Text marked with a flag that
is reply or dispatch in normal TMS message. The query
template needs to be configured in the CPS in the quick test
list. You can choose from the quick text list, including queries
if present.
You shall receive a service advertisement message to
indicate the Query is available after you have successfully
logged in the radio with a Two-Factor Authentication.
Note: The query server must be selected as the destination
so that it can receive the query message and respond the
query with text message. The query server must be an entry
in the data user list in the CPS.
Procedure:
[Preprogrammed Button]
1. Press the preprogrammed TMS Query button.
2. or to scroll through the list of messages.
3. Press the Menu Select button below Sel to select the
required message.
4. The message appears on the Compose screen, with a
blinking cursor at the end of it.
Use the keypad to type or edit a username.
Press to move one space to the left.
Press to move one space to the right.
Press the Menu Select button directly below Del to delete
any unwanted characters.
Press to add a space.
Press to toggle between mixed case mode,
uppercase mode, and lowercase mode.
Press to toggle between numeric and letter mode.
Model 3
To Next Page
Loading...
Need help?
General
