APX 8000XE M2 AND M3
183
NEXT > < PREV CONTENTS
Security
Changing Your Tactical Inhibit Password
ADVANCED FEATURES
Procedure:
1. or to Pswd.
2. Press the Menu Select button directly below Pswd.
The display shows Change Password screen.
3. or to Tactical Inh Encode Pswd.
4. Press the Menu Select button directly below Sel.
5. Enter the old password.
6. Press the Menu Select button directly below Ok.
7. Enter the new password.
8. Press the Menu Select button directly below Sel.
9. Re-enter the new password.
10.Press the Menu Select button directly below Sel.
The password is updated.
OR
If the two passwords do not match, repeat Steps 5
through 10.
Note: If you enter three incorrect old passwords, the radio
exits the password feature. You cannot access this feature
again until you turn the radio off and on.