APX 8000XE M2 AND M3
184
NEXT > < PREV CONTENTS
Radio Stun and Kill
Radio Stun
ADVANCED FEATURES
This feature allows you to stun another radio by sending an
over the air command using the menu on your radio.
This feature prevents an unauthorized user from using the
radio.
Once the radio is stunned, a password is required to re-
activate the stunned radio.
Procedure:
1. or to Stun.
2. Press the Menu Select button directly below Stun.
3. The display shows Enter Password.
Use the keypad to enter your Tactical Inhibit Encode
Password.
4. Press the Menu Select button directly below Ok.
5. The display shows radio Contact IDs.
or to the required ID.
OR
Press the Menu Select button directly below LNum to go
to the last number dialed.
OR
Use the keypad to enter the required ID.
OR
Press the Menu Select button directly below Send to
initiate command.
If the receiving radio does not have encryption key to
decrypt the received the command, your radio display
shows Ack received.
OR
If the receiving radio does not encryption key to decrypt
the received encrypted command, your radio display
shows Decrypt failed.
OR
If the receiving radio is powered off, your radio display
shows No Acknowledgement.
Once the receiving radio received the command, its screen
locked and request for password.
Model 3