APX 8000XE M2 AND M3
99
NEXT > < PREV CONTENTS
Dynamic Zone Programming (DZP)
Saving a Channel in the Dynamic Zone from Channel Name
ADVANCED FEATURES
With the radio in Dynamic Zone, follow the procedure below.
Procedure:
1. or to ZnPr.
2. Press the Menu Select button directly below ZnPr to
enter Program Zone screen.
3. Press the Menu Select button below Edit.
The display shows Search Options screen.
4. or to Channel Name.
5. Press the Menu Select button directly below Sel.
The display shows Channel Name screen.
6. A blinking cursor appears on the Channel Name screen.
Use the keypad to type or edit the channel name.
Press to move one space to the left.
Press to move one space to the right.
Press the Menu Select button directly below Del to delete
any unwanted characters.
Press to add a space.
Press to toggle between mixed case mode,
uppercase mode, and lowercase mode.
Press to toggle between numeric and letter mode.
7. Press the Menu Select button directly below Srch once
the entry is done to initiate searching.
OR
Press the Menu Select button directly below Cncl to
return to Search Options screen.
The display shows Searching....
OR
If the radio is triggered to search for an empty entry, the
display shows Invalid entry.
Repeat step 6.
Model 3
To Next Page
Loading...
Need help?
General
