How to turn on Motorola 9500 Cell Phone if it won't power on?
If your Motorola Cell Phone won’t power on, check the battery. Ensure it is charged, properly fitted, and that the contacts are clean and dry.
What to do if Motorola Cell Phone won't unlock?
If your Motorola Cell Phone won’t unlock: * If you have inserted a new SIM card, enter the new PIN code. * If you have a replacement phone, enter the default phone unlock code — 1234. * If you have forgotten the unlock code, press to change the unlock code (you need your security code).
How to fix Motorola 9500 Cell Phone if battery won't charge?
If your Motorola Cell Phone battery won’t charge, consider the following: 1. Check the charger to ensure it is properly connected and that its contacts are clean and dry. 2. Inspect the battery contacts to ensure they are clean and dry. 3. If the battery temperature is warm, let it cool before recharging. 4. If it is an old battery, its performance declines after several years of use, consider replacing it. 5. Ensure you have a Motorola-approved battery installed. If you see 'Invalid Batt.' in the display, you will not be able to charge the battery.
Why can't I receive calls on my Motorola Cell Phone?
If you can't receive calls on your Motorola Cell Phone, try these steps: * Ensure that your phone is powered on. * Check the antenna to see if it is fully extended and rotated and that you have a clear view of the sky. * Check the signal strength; if the signal is weak, move to an open space or closer to a window if you're in a building. * Check the Call Forwarding and Call Barring settings. * Make sure the Ringer setting is not off, as this will prevent audible ringing. * Check to see if your Fixed Dialing list is enabled. If you are in cellular mode you must disable it. You must check and disable the feature from satellite mode.
How to make international calls on Motorola 9500 Cell Phone?
To make international calls on your Motorola Cell Phone: * Include the relevant codes by pressing and holding the 0 key to display the international dialing prefix (+), then enter the appropriate country code followed by the phone number. * If you are in cellular mode, some service providers automatically bar international calls; contact your service provider. * If you are in CDMA/AMPS cellular mode, you must map the international access code to use the 0 key to display the international dialing prefix (+).
Why does my Motorola 9500 Cell Phone battery drain so fast?
Several factors can cause your Motorola Cell Phone battery to drain faster than normal: * If you are in an area of variable coverage, your phone uses extra battery power. * A new battery needs two to three charge/discharge cycles to attain normal performance. * Battery performance declines after several years of use; consider replacing the battery. * Allow the battery to fully discharge (until the phone turns itself off) and then charge the battery overnight. * Extreme hot or cold temperatures can significantly reduce battery performance. * Make sure that your antenna is fully rotated and extended and you have a clear view of the sky, this helps use less battery power.
What does 'Check Card' mean on my Motorola 9500?
If your Motorola Cell Phone displays 'Check Card' or 'Insert Card' even with the SIM card inside: * Ensure the SIM card has been inserted correctly. * The contacts of the SIM card may be dirty. Turn the phone off, remove the SIM card and rub the gold chip on the card with a clean cloth. Replace the card in the phone. * If the display says 'Blocked or Bad Card See Supplier', contact your service provider.
Why my Motorola 9500 SIM card won’t work?
If your Motorola Cell Phone SIM card won’t work: * Ensure the card is inserted correctly. * Check if the gold chip is visibly damaged or scratched; if so, return the card to your service provider. * Check the SIM and phone contacts; if they are dirty, clean them with an antistatic cloth.
Why does my Motorola Cell Phone get warm?
It is normal for your Motorola Cell Phone to become warm during long calls or while charging. This heat is produced by the electronic components within the phone.
Why can't I access messages on my Motorola 9500 Cell Phone?
If you can't access your messages on your Motorola Cell Phone: * Ensure you are in the correct mode. If you do not have a GSM cellular cassette installed, you must be in satellite mode to access your messages. * Verify that your GSM Cellular Cassette is inserted. You must have a GSM Cellular Cassette inserted to access messages from cellular mode.
Lists options related to phone book management.
Lists options for managing call-related features.
Lists options for accessing message services.
Lists options for tracking call usage and timers.
Lists options for selecting operating modes.
Lists options for network configuration.
Lists options for configuring phone settings.
Discusses standards for protection against RF electromagnetic energy.
Instructions on using supplied or approved replacement antennas.
Describes how to hold the phone for optimal operation.
Provides advice for efficient phone usage.
Explains modes, key presses, prompts, and tips used in the guide.
Explains symbols indicating satellite or cellular mode features.
Describes how key presses are represented in the guide.
Explains how phone prompts and messages are displayed.
Explains the function of the volume keys.
Describes the location and function of the SIM card eject button.
Explains how to use the satellite antenna for calls and services.
General| Network Technology | GSM |
|---|---|
| Status | Discontinued |
| SIM | Mini-SIM |
| Call records | Yes |
| 3.5mm jack | No |
| Radio | No |
| Games | Yes |
| Messaging | SMS |
To Next Page