Motorola AP-6521 Series User Manual

AP-6521 Series Access Point Installation Guide
12
5. Verify the behavior of the access point LEDs. For more information, see “LED Indicator” on
page 15.
6. Align the bottom of the ceiling T-bar with the back of the access point.
7. Orient the access point chassis by its length and the length of the ceiling T-bar.
8. Rotate the access point chassis 45 degrees clockwise.
9. Push the back of the access point chassis on to the bottom of the ceiling T-bar.
10. Rotate the access point chassis 45 degrees counter-clockwise. The clips click as they fasten
to the T-bar.
11. Verify the behavior of the access point LEDs. For more information, see “
LED Indicator” on
page 15.
12. The access point is ready to configure. For information on basic access point device
configuration, see “
Defining a Basic Configuration” on page 17.

Motorola AP-6521 Series Specifications

General

Brand	Motorola
Model	AP-6521 Series
Category	Wireless Access Point
Language	English