Need help?Do you have a question about the Motorola AP-8132 and is the answer not in the manual?
General| Model | AP-8132 |
|---|---|
| Type | Wireless Access Point |
| Manufacturer | Motorola |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Wireless Standards | 802.11a/b/g/n/ac |
| MIMO Technology | 3x3 MIMO |
| Ethernet Ports | 2 x 10/100/1000 Mbps |
| Antennas | Internal antennas |
| Management | Web-based management, SNMP |
| Power over Ethernet | 802.3af PoE |
| Mounting Options | Wall/Ceiling Mount |
| Security Features | WPA/WPA2, 802.1X, MAC filtering |
| Operating Temperature | 0°C to 50 °C |
Describes graphical alerts used for notes, cautions, and warnings.
Lists critical safety and installation precautions to be observed.
Details steps for preparing the installation site, including surveys.
Lists the items included in the AP-8132 access point package.
Provides step-by-step instructions for mounting the access point on walls or ceilings.
Outlines essential precautions to take before installing the access point.
Offers guidelines for optimal placement to avoid signal loss.
Explains the power injector system for powering the access point via Ethernet.
Details the procedure for mounting the access point on a wall.
Describes how to install the access point on a suspended ceiling T-bar.
Guides through installing the access point above a suspended ceiling tile.
Lists supported antenna suites and models for the AP-8132.
Explains the meaning of the LED indicators for status display.
Defines the access point's role as Virtual Controller or Standalone.
Sets the access point's routing or bridging mode functionality.
Configures the access point's LAN interface settings, including DHCP.
Configures the access point's WAN interface settings.
Defines radio band support (2.4GHz/5GHz) and sensor functionality.
Configures network address and security settings for WLANs.
Configures the RADIUS server for user authentication if required.
Sets device deployment, administrative contact, and system time.
Summarizes and commits the initial access point configuration settings.
Lists the electrical characteristics of the AP-8132 model.
Details the physical dimensions, weight, and environmental specs.
Outlines the radio specifications, data rates, and standards.
Covers country approvals, FCC/IC frequency rules, and country selection.
Addresses wireless device safety, pacemakers, and RF exposure guidelines.
Details compliance with international standards, EU, US, Canada, and IC regulations.
Specifies power supply requirements and FCC/Canadian interference rules.
Includes statements for EEA, Japan, Korea, Australia, Brazil, and other countries.
Provides end-of-life product return and recycling information for EU customers.
To Next Page