To Next Page

To Previous Page

AP-7131 Default Configuration

V3.2.0.0-067R

WAN (a.k.a

GE2)

Static IP: 10.1.1.1

Static Mask:

255.0.0.0

Port Settings: Auto

LAN1 (a.k.a

GE1)

DHCP Client

Auto-update enabled

Default Gateway

Ethernet Port Enabled

Port Settings: Auto

LAN2 Disabled

Access via

LAN1 port

HTTP, HTTPS, Telnet,

SSH, SNMP: enabled

Access via

WAN Port

HTTP, HTTPS, Telnet,

SSH, SNMP: enabled

Firmware Update

Version V3.2.0.0-067R is the fifth officially supported firmware release for the

AP-7131. AP-51x1 firmware and configurations are not supported on the AP-7131.

To conduct a firmware update on the AP-7131:

1. Select ‘System Configuration’ Æ ‘Firmware Update’ from the AP-7131 menu

tree of the GUI.

2. Specify the name of the target firmware file within the ‘Filename’ field.

3. If the target firmware file resides within a directory, specify a complete path

for the file within the ‘Filepath (optional)’ field.

4. Enter an IP address for the FTP or TFTP server used for the update.

5. Select either the FTP or TFTP button to define whether the firmware file

resides on a FTP or TFTP server.

6. Set the following FTP parameters if applicable:

• Username - Specify a username for the FTP server login.

• Password - Specify a password for FTP server login.

Motorola AP-7131 Release Notes

Other manuals for Motorola AP-7131