Motorola APX 4000 User Training

APX 4000
Zone Batt Nuis
Entering Scan Mode
• By pushing the Scan On/Off button, your radio will
enter Scan Mode
• Look for the Scan Symbol in the radio display to
ensure that Scan mode is On
• Turning the Scan Off allows you to ONLY monitor
the Channel which is in the radio display. To resume
scanning, press the Scan On/Off button
APX 4000: Scanning
Note:
When your radio is powered OFF and then ON, it will remain in
the mode that you left it (Scan On or Scan Off)
Scan Symbol

Motorola APX 4000 Specifications

General

IP Rating	IP67
Operating Temperature	-30°C to +60°C
GPS	Optional
Frequency Range	VHF: 136-174 MHz, UHF: 380-470 MHz, 450-520 MHz
Power Output	VHF: 1-5W; UHF: 1-4W
Digital Protocol	APCO P25
Dimensions	5.2 x 2.4 x 1.5 inches (without battery)