APX 4000
Zone Batt Nuis
Entering Scan Mode
• By pushing the Scan On/Off button, your radio will
enter Scan Mode
• Look for the Scan Symbol in the radio display to
ensure that Scan mode is On
• Turning the Scan Off allows you to ONLY monitor
the Channel which is in the radio display. To resume
scanning, press the Scan On/Off button
APX 4000: Scanning
Note:
When your radio is powered OFF and then ON, it will remain in
the mode that you left it (Scan On or Scan Off)
Scan On/Off
To Next Page
Loading...
