NOTICE:
The radio can also be preprogrammed to log only
the radio IDs associated with incoming Dispatch
Calls. Check with your dealer or system
administrator for more information.
• Viewing recent calls using the radio menu:
a. or to Rcnt.
b. Press the Menu Select button directly below
Rcnt to access the Recent Calls feature
screen.
c. or to scroll through the list.
d. To return to the Home screen, press the Menu
Select button directly below Back,
, or the
PTT button.
The radio automatically exits the feature, if the feature
inactivity timer is enabled, when the radio is left idle and the
timer expires. You will hear the Menu Inactive Exit Tone
upon feature exit.
Selecting the Power Level
NOTICE:
This feature must be preprogrammed by a qualified
radio technician.
This feature enables you to reduce the transmit power level
for specific case that requires a lower power level. You can
select the power level at which your radio transmits. The
radio always turns on to the default setting.
Power level Low enables a shorter transmitting distance
and to conserve power. Power level High enables a longer
transmitting distance.
Do one of the following to select the power level. You can
use the options interchangeably depending on your
preference and the programmed functions.
• Selecting the Power Level using the Transmit
Power Level switch:
a. Use the preprogrammed Transmit Power Level
switch to toggle the power level between low and
high power.
• Selecting the Power Level using the radio menu:
a.
or to Pwr.
English
167
To Next Page
Loading...
