channel. This way, you may be prevented from taking over
someone else’s conversation.
1 To activate monitoring, perform one of the following
actions:
• At Home mode where the default zone and
channel are being displayed, or to Mon and
press the Menu Select button directly below Mon
momentarily.
• Take the control head off the hook.
The display shows Monitor On. You hear all
channel traffic.
2 Press the Menu Select button again to deactivate
the monitoring.
The display shows Monitor off.
Pressing the Menu Select button again turns monitor off
and you don’t hear all channel traffic. If you try to transmit
on a receive-only channel, you hear an invalid tone until
you release the PTT button.
English
72
To Next Page
Loading...
