Motorola APX 4500Li - User Login Feature; Logging in as a User

• If the channel or mode selected is
unprogrammed, the display shows
Unprogrammed. Repeat this step.
c. Press to confirm the displayed zone and
channel.
User Login Feature
This feature allows you as the user to be associated with
the radio. With this association, every data application
(Example: Text Messaging Service) takes on a friendly
username.
You can still send text messages without logging in as a
user. The user login feature only enables the recipient of
your message to identify you as the sender by assigning a
username to your message.
NOTICE:
A predefined username that is set more than the
maximum allowed characters is an invalid name.
NOTICE:
Valid characters for a username entry are capital
letters (A–Z), small letters (a–z), numbers (0–9),
symbols (*, #, -, /), and the space character.
The maximum length for a username is eight
characters. Usernames are not case sensitive in
server mode but are case sensitive in non-server
mode.
A predefined username may sometimes be invalid
because the programming software that is used to
set predefined usernames allows you to set
usernames comprising of eight characters or more.
Logging In as a User
1
or to User and press the Menu Select button
directly below User.
The display shows the User Login screen.
2 Perform one of the following actions:
•
or to [ID Entry] and press the Menu
Select button directly below Edit to enter ID. A
blinking cursor appears on the screen. Use the
English
112