35
Using the answering machine
10. Using the answering machine
Your C1 product can digitally record up to 12 minutes of messages. As well
as recording incoming messages, you can record memos for other users.
You can operate your answering machine from:
• the base
• the handset
• or remotely, from any other DTMF telephone, see page 40.
You will need to set the correct day and time (if you have not already done
so) so that you will know when each message was received.
10.1 Set the answering machine day and time
Your answering machine will automatically add the day and time to each
message that is received.
NOTE
If you subscribe to Caller ID service, the date and time will be set on the
handset automatically but you will still need to set the correct ‘Day’ as below.
Using the handset:
Set the day:
1. Press
, scroll to
TAM SETTINGS
and press to conrm.
2. Scroll
to
DAY SETTING
and press . The current day is displayed.
3. Press
or to select the required day and press to conrm.
10.2 Check the current day and time setting
1. Press . The current day and time setting is announced.
10.3 Switch the answering machine on / off
Using the base:
1. Press
.
Using the handset:
1. Press
, scroll to
TAM SETTINGS
and press .
2.
ANS ON/OFF
is displayed, press .
3. Press
or to select either
ON
or
OFF
and press .
To Next Page
Loading...
Need help?
General
