Motorola C330 - Network Selection; Connecting Your Phone to an External Device

Getting More Out of Your Phone - 83
Connecting Your Phone to an External Device
Connect your phone to an external device (such as a computer or
hand-held device) using a USB cable.
Note: Not all devices are compatible with USB cable connections. Check
your external device for specifications.
Attach the cable and do the following:
Network Selection
You can view and adjust your phone’s network settings:
Your service provider registers your phone to a network. You can view
information about the current network, change how your phone searches
for a network, specify your preferred networks, and activate alerts that
indicate when a call is dropped or network registration changes.
To Establish a Connection
1
Check the phone make sure that the phone is
connected and powered on
2 Open the application
on your computer
place the call through the
application (such as
dial-up-networking)
Note: You cannot dial data numbers
through your phone’s keypad. You
must dial them through your
computer.
3 End the transfer on
your computer
close the call and connection when
the transfer is complete
Find the Feature
M
>
Settings
>
Other Settings
>
Network