Motorola C401 User Manual

7Getting started
Connecting the base
1. Plug the telephone line cord into the socket marked on the underside of the base.
2. Plug the power adaptor with clear connector into the socket marked
on the rear of
the base and plug the other end into the mains power wall socket. Switch on the mains
power.
Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert the rechargeable
Ni-MH battery cells supplied. Please note the ’+’ and ’-’ markings inside the battery
compartment and insert in the correct direction.
2. Slide the battery cover back into place.
3. If you are charging the batteries for the rst time, place the handset on the base to
charge for at least 24 hours continuously.
4. When the handset is fully charged,
icon will appear steady on the display. Plug
the other end of the telephone line cord (make sure that one end is already plugged
into the base) into the telephone wall socket.
Press down
1
Slide
2

Motorola C401 Specifications

General

Type	-
Answering machine	No
Mounting type	Desk
Product color	Pink, White
Speakerphone	Yes
Phonebook capacity	50 entries
Call log entries	40
Volume control	Digital
Backlight color	Orange
Display number of colors	Monochrome
Standby time	250 h
Battery technology	Nickel-Metal Hydride (NiMH)
Number of batteries supported	2
Number of handsets included	1