10
6.7 Switch the answering
machine on / o
The phone can digitally record up
to 12 minutes of messages. As well
as recording incoming messages, it
can record memos for other users.
You can operate your Answering
Machine from the base, the handset
or remotely from another phone.
Via the base
1. Press o on the base to turn the
answering machine on or o.
When the answering machine is
on the LED will come on.
Via the handset
Press
M, scroll i or d to
Answ.
Machine
and press M.
Scroll
d to
Voice answer
and press M.
Press
i or d to select either
Answer
only,
Record also
or
O
and press M
to confirm.
6.8 Store a name or number
1. Press M. The display shows
Phonebook
.
2. Press
M. Scroll d to
Add new
.
3. Press
M. The display shows
Enter
name
.
4. Enter the name and press
M. The
display shows
Enter number
.
5. Enter the number and press
M
to save.
Note
Press
h to switch the call between
the earpiece and the loudspeaker.
During a hands-free call, press
i or d
to adjust the volume.
6.4 Lock / unlock the keypad
You can lock the keypad so that it
cannot be operated accidentally
while carrying it around.
Note
When the keypad is locked, you
can still answer incoming calls and
operate the handset as normal during
the call. When the call ends, the
keypad lock comes on again.
1. Press and hold 0.
Keys locked
is displayed.
2. To unlock the keypad, press and
hold 0 again.
6.5 Paging / Find handset
You can alert a handset user that
they are wanted or locate a missing
handset.
Paging calls cannot be answered by
a handset.
1. Press f on the base. All
handsets registered to the base
will ring.
2. To stop the ringing, press f
on the base again or press any
button on the handset.
6.6 Dial mode
Your phone is set to tone dialling.
You should only need to change
this if connected to an older type of
switchboard / PBX which requires
pulse dialling.
1. Press
M, scroll d to
Advanced Set
and press M.
2. Scroll
d to
Dial mode
and press
M.
3. Press
i or d to select
Tone
or
Pulse
and press M to confirm.
To Next Page
Loading...
Need help?
General
