Customer Programming Mode
30
Note: See page 51 for information on frequencies for communicating with other business
radios.
Programming the Interference Eliminator Code
The interference eliminator code helps minimize interference by providing code
combinations that filter out static, noise, and unwanted messages.
1. In Advanced Configuration mode, press S until k displays
and the code number blinks.
2. Pre
ss
[or ] to select the code (see page 54).
3.
Press and hold
Push to Talk
to exit, or press S to continue
programming.
Programming the Available Channels (CLS1410 only)
If you need fewer channels, you can reduce the number of available channels.
1. In Advanced Configuration mode, press S until =
displays and
the
channel number blinks.
2. Pre
ss
[or ] to select the number of channels you want available.
3.
Press and hold
Push to Talk
to exit, or press S to continue
programming.
Note:
The radio retains settings for channels made unavailable.
6864110W15_.book Page 30 Wednesday, April 26, 2023 2:56 PM
To Next Page
Loading...
Need help?
General
