Motorola CLS1410

Customer Programming Mode
29
Entering Advanced Configuration Mode
Advanced Configuration Mode allows you to configure special settings in your radio
without the need of a computer.
Press and hold
Push to Talk and T for 3 seconds while turning the radio on. The
radio beeps and displays k
, the channel number blinks, and the frequency
(indicated by l) and code (indicated by y) display alternately.
Note:
If you press and release the Push to Talk button when programming CSL1410
models, you will return to the front of the Advanced Configuration Mode.
Selecting a Channel (CLS1410 Only)
1. In advanced configuration mode, press S until the channel number
blinks and the frequency and code display alternately (this is the
first setting after you enter advanced configuration mode).
2. Press
[or ] to select the channel.
3. Press and hold
Push to Talk to exit, or press S to continue
programming.
Configuring the Operating Frequency from a Pre-programmed Frequency List
1. In advanced configuration mode, press
S until l displays and
the frequency number blinks.
2. Press
[ or ] to select the frequency.
3. Press and hold
Push to Talk to exit, or press S to continue
programming.
6864110W15_.book Page 29 Wednesday, April 26, 2023 2:56 PM