106 9. Tools
䡲 Enter the name or enter a phone number, Direct
Connect number, or Talkgroup number.
– or –
Press
Browse (left softkey) to choose from
common event names.
3. To assign a location to the event (optional), select
Location and enter the location or enter a phone
number, Direct Connect number, or Talkgroup
number.
4. The start time automatically assigned to an event is
the beginning of the day. To change the start time
or assign no start time, select
Start and then enter a
start time or press
No Time (left softkey).
5. To assign a duration, select Duration and select a
duration from the list or select
Custom and enter a
duration.
6. The date automatically assigned to an event is the
date that was highlighted or selected when you
began creating the event. To change the date of
the event, select
Date and then enter a date.
7. To make the event a recurring event:
䡲 Select Repeat and then select a repeat cycle.
● If the event occurs more than once a week,
select
Multiple Day, and select the days.
● Press Done (left softkey).
䡲 In the End field, select a date for the event to stop
recurring.
8. To create a reminder for this event, select Reminder
and then select a reminder time or select
Custom to
enter a reminder time.
9. To set the ring tone for a reminder, select Ring Tone
and then select a ring tone.
10. To assign a profile for your phone to use during
the event, select
Profile and then select a profile.
(Your phone switches to this profile when the event
starts and switches back to the previous profile
when the event ends.)
11 . To assign a Java application to start when the
event starts, select
App and then select an
Note
If an event has no start time, you cannot create a
reminder for it.
To Next Page
Loading...
