Tools
9. Tools 117
3. Insert the data plug into the COM port of your
laptop or other device.
Make sure no other application is using the COM port
selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
䢇 Bits per second: 4800
䢇 Data bits: 8
䢇 Parity: None
䢇 Stop bits: 1
䢇 Flow control: Hardware
To set your phone to send location information to your
laptop or other device:
1. Press / > GPS > Interface.
2. Set NMEA OUT to ON.
Your phone is now sending location data to your
laptop or other device.
To stop sending location data to your laptop or other device:
䊳 Set NMEA OUT to Off.
Each time you power your phone on,
NMEA OUT is
automatically set to
Off.
Memo Feature
Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
1. Press / > Memo.
2. Enter a number and press r.
To view the memo later:
䊳 Press / > Memo.
To delete the memo:
1. Press / > Memo.
2. Press and hold Delete (left softkey) and then
press r.
To edit the memo:
1. Press / > Memo.
To Next Page
Loading...
