Chapter 1
CUSTOMER PROGRAMMING SOFTWARE (CPS)
INSTALLATION
1.0 CPS Installation Instructions for Windows 98/NT/2000/ME/XP
Please read the instructions below before proceeding to the on-line installation package for the
CPS. Also be sure to read carefully all on-screen instructions during the installation.
The latest CPS can be located and downloaded from Motorola Online at
http://moleurope.comm.mot.com. The CPS can be located at Resource Centre/Radio Service
Software/Customer Programming Software/Commercial Series CPS [ver-#].
1.1 System Installation Requirements
1.2 Installation Procedure
1. Please ensure that you have successfully downloaded the Customer Programming
Software and the files have been unzipped into a folder.
2. Exit all programs that are currently running.
3. Locate the setup.exe file and double click.
4. The setup package will install the CPS. Please follow the on-line installation instructions.
Congratulations! You have completed the installation of the Customer Programming Software.
1.3 Starting the Application
To start the Customer Programming Software
1. Click on the Start button.
2. Select Programs ->Motorola ->Commercial Series CPS ->CPS.
Minimum Suggested
RAM
8 MB 16 MB
Free Hard-Drive Space
10 MB 16 MB
Display Type
VGA (16 colors) SVGA (256 colors)
CPU
486 Pentium 133MHz
To Next Page
Loading...
