Motorola D1003 - Enter a Pause; View an Entry; Edit an Entry; Delete an Entry

18 Phonebook
4.5 Enter a pause
If your D1000 is connected to a switchboard, you may need
to enter a pause in a stored number. This gives the
switchboard time to get an outside line. A Pause is normally
stored after the switchboard access code (e.g. 9)
1. When storing a number, press and hold # until the
display shows P. You can then continue storing the
phone number.
4.6 View an entry
In standby:
1. Press d.
2. Enter the first letter of the name to search alphabetically
then scroll
u or d to the exact entry. The name is
displayed.
3. Press e to display the number. If there are more
than 12 digits, press
e again to see the rest of the
number.
4. Press > to return to standby.
During a call:
1. Press m twice to open the phonebook menu.
2. Enter the first letter of the name you want then scroll u
or
d if necessary to the exact name. Press e to
display the number. If there are more than 12 digits,
press
e again to see the rest of the number.
3. Press > to cancel the phonebook display.
4. Press > again to end the call.
4.7 Edit an entry
1. Press d.
2. Scroll u or d to the entry you want to edit and press
m. EDIT ENTRY is dsplayed. Press m again.
3. Edit the name and press m to confirm. Use e to
delete characters.
4. Press m and edit the number.
5. Press m to confirm.
6. Scroll u or d to select NO GROUP , GROUP A , B or C and
press
m to confirm.
7. Press > to return to standby.
4.8 Delete an entry
1. Press d.
2. Scroll to the entry you want to delete and press m.
3. Scroll d to DELETE ENTRY and press m.
4. Display shows CONFIRM? . Press m.