Motorola D1010 Series User Manual

22 Advanced settings
8. Advanced settings
This setting is useful to access certain network and PABX/switchboard
services.
Recall time
The default D1011 recall time is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press m, scroll d to ADVANCED SET and press m.
2. RECALL TIME is displayed. Press m.
3. Press u or d to select the setting you want: SHORT , MEDIUM , LONG .
4. Press m to confirm.
5. Press > to return to standby.
NOTE
The use of your D1011 cannot be guaranteed on all PABX.
Dial mode
The default D1011 dialling mode is suitable for your country and network
operator. It is unlikely that you should need to change this setting unless
advised to do so.
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to DIAL MODE . Press m.
3. Press u or d to select TONE or PULSE .
4. Press m to confirm.
5. Press > to return to standby.
Temporarily switch from Pulse to Tone dialling
1. Press and hold *.
The dial mode will change from Pulse to Tone for the duration of the call.
Call barring
Prevent certain numbers from being dialled from your D1011. Store up to
four specific numbers, each up to 4 digits – for example, international or
local prefixes.
Bypass call barring by switching the setting Off or On.
NOTE
If you switch Call barring on,
BARR MODE ON will be displayed on your
screen in standby mode.
Switch call barring on/off
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to CALL BARRING . Press m.
3. Enter the master PIN (default setting 0000) and press m.
4. MODE is displayed. Press m.
5. Press u or d to select ON or OFF . Press m to confirm.
6. Press > to return to standby. You can now set the number
(See below).
Set a number to be barred
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to CALL BARRING . Press m.
3. Enter the master PIN (default setting 0000) and press m.
4. Scroll d to NUMBER . Press m.
5. If necessary, scroll u or d to the next available slot.
6. Press m and enter the number or prefix you want to bar. Press
m
to confirm.
7. Press > to return to standby.
Easy call
When activated, this feature allows you to dial a number by pressing any
key on your handset (except
>). This feature is very useful for access
to emergency services.
Switch easy call on/off
1. Press m, scroll d to ADVANCED SET and press m.
2. Scroll d to EASY CALL . Press m.
3. Enter the master PIN (default setting 0000) and press m.
4. MODE is displayed. Press m then press u or d to select ON or OFF .
Press
m to confirm.
5. Press > to return to standby.

Motorola D1010 Series Specifications

General

Brand	Motorola
Model	D1010 Series
Category	Cordless Telephone
Language	English