8 Getting to know your phone
Handset display
A Display icons
On when the line is in use.
Flashes when there is an incoming call.
Flashes when you have new voicemail messages.*
Off when you have no new voicemail messages.
Flashes when you have missed calls and new number(s) are in the Calls list.*
Phonebook is open.
The alarm clock has been set.
Handsfree mode.
Handset ringer is off.
Answer machine On. Off when answer machine is off. Flashes when you have new
messages. Flashes fast when the memory is full.
Steady when the handset is registered and within range of the base. Flashes when the
handset is out of range or searching for base.
The approximate power levels of your battery are indicated as below:
Battery is fully charged.
Battery is partially charged.
Battery is running low.
Battery is almost empty. The battery icon will flash and emit a warning beep every
minute during call.
* For this feature to work, you must subscribe to Voicemail service or Caller ID from your network
operator. A subscription fee may be payable.
B OK displayed
Press the m key to select and validate a setting
C V W displayed
Press u or d to scroll through the options in a menu, to open the phonebook or Call log (include
CALL LIST
or
ANSW MACHINE
) when in standby.
D Back X displayed
Press e to go back to the previous menu option, to cancel an action or to delete a character.
Overview of the base
A Paging key
Paging is a useful way of finding lost handsets.
1.
Press p on the base.
- All handsets ring.
2.
Press p again to cancel the paging call or press any key on the handset to stop the paging
call.
B Volume Up
C Volume Down
To Next Page
Loading...
Need help?
General
