4 Let’s go
Let’s go
let’s get you up and running
Assemble & charge
1 remove cover 2 slide red latch to left,
insert battery
3 push battery
completely in
4 insert microSD (may
already be done)
Caution: Please read the battery use and safety text in
the important legal and safety information packaged
with your phone.
Tip: To save battery life, see “Battery tips” on page 25.
Set up & go
Create or log into a MOTOBLUR account to get your
contacts, email, messages, and status information, for
all your accounts, all in one place, all the time. There’s
more in “Your MOTOBLUR account” on page 11.
Registration is secure, and should only take a few
minutes.
5 place strap over
battery, replace cover
6 charge up
To Next Page
Loading...
