Receiving and Making Calls
English
23
Receiving an All Call
An All Call is a call from an individual radio to every radio on the
channel. It is used to make important announcements requiring
the user’s full attention.
Procedure:
When you receive an All Call:
1 A tone sounds and the LED blinks green. Your radio
unmutes and the incoming call sounds through the radio's
speaker.
2 An All Call does not wait for a predetermined period of time
before ending.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is now
available for use.
You cannot respond to an All Call.
NOTE: The radio stops receiving the All Call if you switch to a
different channel while receiving the call.
During an All Call, you will not be able to use any
programmed button functions until the call ends.
Receiving and Responding to a Phone Call
Phone Call as a Private Call or Group Call
Procedure:
When you receive a Phone Call as a Private Call or Group Call:
1 The LED blinks green. Your radio unmutes and the incoming
call sounds through the radio’s speaker.
2 To respond, hold the radio vertically 1 to 2 inches
(2.5 to 5.0 cm) from your mouth.
3 Press the PTT button to talk and release it to listen.
4 If there is no voice activity for a predetermined period of
time, the call ends.
5 You hear a short tone.
If Phone Call capability is not enabled in your radio, your radio
mutes the call.
To Next Page
Loading...
Need help?
General
