49Connect & transfer
Wi-Fi hotspot
Note: This phone supports apps and services that may use a lot 
of data, so make sure your data plan meets your needs. 
Contact your service provider for details.
Your can make your phone a Wi-Fi hotspot to provide portable, 
convenient internet access to other Wi-Fi enabled devices.
Note: Keep it secure. To protect your phone and hotspot from 
unauthorized access, it is strongly recommended that you set 
up hotspot security (WPA2 is the most secure), including 
password.
Find it: Apps  >
Settings
 >
More
 >
Tethering & portable 
hotspot
, then tap the 
Mobile Hotspot
 switch to turn it on
 
1 Your phone turns off 
Wi-Fi
 power and uses the mobile 
network for internet access. Tap 
Mobile Hotspot settings
 
>
Configure Mobile Hotspot
 to set up security:
•Network name: Enter a unique name for your hotspot.
•Security: Select the type of security you want: 
None
 or 
WPA2 PSK
. For 
WPA2
, enter a unique password that 
others will need to access your Wi-Fi hotspot.
Note: 
WPA2
 is recommended by IEEE.
• Password: Create a password with at least eight 
characters.
•
Broadcast Channel
: If you notice interference after 
your hotspot has been active for a while, try different 
channels.
• Client (DHCP) start address
2 Ta p  
SAVE
 when the settings are complete.
When your Wi-Fi hotspot is active, other Wi-Fi enabled devices 
can connect by entering your hotspot’s 
Network name
, 
selecting a 
Security
 type, and entering the correct wireless 
Password
.
Wi-Fi modes
For those who like to get a bit more technical, your phone 
supports the following Wi-Fi modes: 802.11b, g, n, ac.
USB cables
Note: Copyright—do you have the right? Always follow the 
rules. See “Content Copyright” in your Legal Guide.
To load music, pictures, videos, documents, or other files from 
your computer, connect your phone to your computer with a 
USB cable. To change the type of USB connection (if 
necessary), tap Apps  >
Settings
 >
Storage
 >Menu  
>
USB computer connection
.
Tip: Make sure to connect the phone to a high power USB port. 
Typically, these are located directly on your computer.
Note: The first time you use a USB connection, your computer 
may indicate that drivers are being installed. Follow any 
prompts you see to complete the installation. This may take a 
few minutes.
• For Microsoft® Windows®: On your computer, choose 
Start, then select Windows Explorer from your list of