Motorola DROID RAZR HD - Getting Started; Assemble and Charge Battery

4 Start
Start
Assemble & charge battery
SIM in, memory card in (optional), charge battery, turn on
smartphone.
Note: The micro SIM card may be already inserted in
your smartphone.
2
Insert optional
microSD memory
card.
Charge fully.
C
4
5.5 H
Insert micro SIM.I
n
3
Remove the tray using the
Card Insertion/ Removal
Tool.
R
C
1
c
b
a
1 Insert the pin on the Card Insertion/Removal
Tool into the hole in the tray to release the
tray. Then, slide the tray out of the
smartphone.
Note: The SIM card tray is small, so be
careful.
2 Insert the optional microSD memory card into the left
card slot.
Tip: If your microSD memory card doesn’t click in,
position the flat edge of the Card Insertion/Removal
Tool on the edge of the card, and gently push in until it
clicks. Use the same procedure to eject the microSD
card when you need to remove it.
3 Insert the micro SIM card into the SIM card tray, with
the gold contacts facing down, then push the SIM card
tray into the right card slot.
Caution: Do not insert the micro SIM card directly into
the smartphone without the SIM card tray.
4 Plug your smartphone charger into a power outlet, and
insert the charger’s micro USB connector into your
smartphone to charge it.
Caution: Before using your smartphone, please read
the safety, regulatory and legal information provided
with your product.