BASICS
BLUETOOTH
®
PAIR A BLUETOOTH HEADSET WITH YOUR
SMARTPHONE
To connect with a new device, you need to pair with
it. You only need to do this once for each
device—to connect again, just turn on the device.
1
Make sure the device you are pairing with is in
discoverable mode.
Note:
Refer to the guide that came with the device for details.
2
Touch Menu >
Settings
>
Wireless &
networks
>
Bluetooth settings
.
3
Touch
Bluetooth
to turn on and scan. If
Bluetooth power is already on, touch
Scan for
devices
.
4
Touch a device to connect.
5
If necessary, touch
OK
, or enter the device
passkey (like
0000
) to connect to the device.
When the device is connected, the Bluetooth
connected indicator appears in the status
bar.
Note:
Using a mobile device or accessory while driving may cause
distraction and may be illegal. Always obey the laws and drive safely.
To Next Page
Loading...
