Motorola DTR550 - Setting Up Scan Lists with CPS

November 2008 9980384R89-E
5-4 Programming the Radio with Customer Programming Software (CPS) (DTR410 Only): Setting up Scan
Setting up Scan
To use the Scan feature, you need set up a scan list for each of the radio’s channels.
1. Select “Lists->Scan List->Channel x” from the left of the CPS screen.
2. All the PublicGroups on that channel is displayed. Choose the relevant PublicGroup that you want to be
included in the channel scan list.
3. Continue the above for all the related channels.