EasyManuals Logo

Motorola DTR600 Quick Reference Guide

Motorola DTR600
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
Turning the Radio On or Off
To turn on the radio, press and hold the Power button until the radio
vibrates and the display shows Motorola Logo.
To turn off the radio, press and hold the Power button (~3 seconds)
until the power down screen is shown and the power down tone is
heard.
Setting the Non-Interference or Privacy Feature
This feature ensures improved private communications by configuring an
appropriate PROFILE ID number.
Important: By default, the PROFILE ID number is “0000”.
Ensure that all your radios are configured with the same
PROFILE ID number and is easy to remember.
1 Press Menu/OK Advanced PROFILE ID .
2
Enter a four-digit radio PROFILE ID number.
Transmitting Calls
Notice: Wait for the Talk Permit Tone to end and speak. If you
receive a busy tone and your radio display shows Call Failed,
the channel is either not available, busy, or there are no users
reachable within transmission range.
1 To call, press PTT button with the selected Channels/Contacts.
The display shows call screen with call type and caller ID.
2
Wait for the Talk Permit Tone to end and speak into the microphone.
Browsing and Selecting Channels
To select a channel, press the Up or Down button on the home
screen.
Battery Status Information
Battery status icon displays on the top left of the radio screen.
Table 1: Battery Status
Battery Icon Battery Status
High
Medium
Low
Critical
Shutdown
1
Starting a Private Reply
The Programmable button is set to Private Reply feature by default.
This feature allows two people to instantly connect privately after a
group transmission is over.
Notice: There is a channel Hangtime after a Private
transmission. By default, the Hangtime is set to 10 seconds.
1 To initiate a Private Reply, press the Programmable button during a
group call.
The display shows Private Reply On.
2 After a group call, press PTT button to call privately.
The display shows Private Reply.
3
Wait for the Talk Permit Tone to end and speak.
1
When the battery is on a Shutdown level, a continuous alert tone and automatically shutdown occurs.
English
3

Other manuals for Motorola DTR600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola DTR600 and is the answer not in the manual?

Motorola DTR600 Specifications

General IconGeneral
BrandMotorola
ModelDTR600
CategoryTwo-Way Radio
LanguageEnglish

Related product manuals