8
English
RADIO OVERVIEW
English
The default functions assigned to your radio are described
in the table below.
If your dealer has reprogrammed your radio’s
programmable buttons, you may want to write down the
new functions in the table below.
Scrambling
Enable/Disable
Enables or disables Voice Inversion
Scrambling feature for the selected channel.
Applicable for Long Press only.
Selective Call Initiates Selective Call.
Squelch Level Selects desired squelch level: Normal or
Tight.
Sticky Monitor Toggles the permanent monitor function until
the button is pressed again. Applicable for
Long Press only.
Talkaround/
Repeater Mode
Enables toggle between repeater and
talkaround mode operations.
Unassigned No function is programmed to this button.
Volume Set Controls the audio level. The button emits a
continuous tone to indicate the current
volume level. To change volume level, turn
the volume knob to the desired level while
pressing the programmable button.
Applicable for Long Press only.
VOX Enables or disables VOX feature for the
selected channel.
Button Function
Press
Type
Side
Button 1
Side
Button 2
Front
Button 1
Front
Button 2
Front Button
3
Short
Press
Monitor Power
Level
Squelch
Level
TPL or
DPL
Channel
Scan
Long
Press
Unassign PTT ID Channel
Alias
Keypad
Lock
Nuisance
Channel
Delete
Press
Type
Side
Button 1
Side
Button 2
Front
Button 1
Front
Button 2
Front Button
3
Short
Press
Long
Press