Get Started
screen and tap Settings > Stylus, then tap the switch next to Last
known location to turn it on.
Tip: Permission required. Tap the recorded coordinates to view the
location in Maps.
» Play a sound while drawing: You can play a sound when drawing on
the screen with your stylus in Moto Note. To turn it o, tap Settings
> Stylus > Sound.
Note: This feature is only available in drawing mode.
Tip: If your ring volume is muted, you can't hear the sound while
drawing. To adjust the ring volume, see Volume buttons.
» Vibrate when inserted: To feel a quick vibration when the stylus is in
place, swipe up from the home screen and tap Settings > Stylus,
then tap Vibrate when the stylus is inserted to turn it on.
Insert the SIM and microSD cards
To activate phone service, you might need to insert a SIM card, or this
may have been done for you. You can also add a microSD card, which is
optional and sold separately.
Note: Make sure you use the correct size SIM card and don’t cut the SIM
card.
1 Insert the SIM tool into the SIM tray hole to pop out the tray.
Tip: Refer to the diagram below for tray and hole location.
2 Insert the SIM card with the gold contacts down, then gently push the
tray into the slot.
3 Add a microSD card for additional storage.
Note: microSD card is optional, sold separately.
SIM card insert graphic. Make sure the SIM card is inserted correctly.
Nano SIM
SIM
To Next Page
Loading...
