34
English
SPECIAL CALLS
To initiate a data call via the keypad: ToinitiateaDatacallviathecontact list
In this method data may consist of alphanumeric
characters which are pre-programmed into your
radio by your dealer.
Note: The maximum data message size is limited
to 20 characters which includes address
information and data selection characters.
1 *2* Part of modifier
2 Enter message from keypad in alphanumeric
characters (ref pages 7 & 8)
3
* Final part of modifier
4 Enter Called radio address
5 Display shows:
y/z to
scroll message:
(where NNN is called radio
address.)
6 Press PTT button or # tomakeacalltothe
dialled numbers
Tone D sounds
Display shows:
7 Press CLEAR button or *# at any time
to delete dialled numbers and return radio to
IDLE STATE when tone H sounds
*2*Call Bryan
ASAP*NNN
Sending Data
Number
1
c to enter Menu Mode.
2
y/z until:
3
c to select:
4
y/z until:
w to display
w to display
w to return to
5 c or PTTbuttontomakeradiocall.
Display shows:
6
When finished with call.
7 CLEAR BUTTON or
x or
*#
Tone A sounds
Contact List
Contact List
Alpha Alias
Number
Ring Tone
Alpha Alias
Sending Data
Alias/Number
Call Ended
To Next Page
Loading...
