Motorola GM1280

55
English
SETTINGS
DATA DISPLAY
This feature allows you to switch on and off the
data display. This is important if the radio is
being used with external data equipment
(DTE) supported via MAP 27, to prevent loss
of data messages. Refer to Special Calls -
Short Data Messages for a detailed description
of this feature.
Yo u c a n sw i t c h On or Off theDataDisplayby
using a pre-programmed Data Display button
when the radio is in the IDLE STATE, or using
thekeypadorviathemenu.
Using the Data Display Button
1.
Press the Data Display button to switch on
the Data Display, when the feature enable alert
will sound.
2. Press the
Data Display button again to switch
off Data Display when the feature disable alert
will sound.
Using the Keypad:
1. Enter *23000# to turn OFF the
incoming short data display.
2. Enter *23001# to turn ON the
incoming short data display.
Using the Menu
1 EnsureradioisinIDLESTATE.
2
c to enter Menu Mode.
3
+ or e until:
4
c to select
5
+ or e until:
6
c to select
Display shows
current status e.g. :
7
+ or e until:
8
c to select
Display shows:
(for 2 seconds)
9
Radio exits menu and returns to IDLE STATE
Settings
Settings
Data Display
Data Display
Off
On
On
Selected